The Fire alarm controller is set in each energy storage cabin, with alarm signal acquisition with the cabin detector, start the Fire extinguishing device, linkage alarm, linkage communication with BMS and other functions.
The Power Supply Voltage | AC 220V |
Backup Lead-acid Batteries | DC24V 5AH |
Switching Power Supply | 24~27V 5A |
Power-off Endurance Time | 3 hours |
Installation | wall |
Rated Power | ≤10W (Excluding nodes) |
Relay Number | Four dry contact outputs |
Alarm Indicator Interface | 4 road |
Communication Methods | Two CAN ports and two 485 ports |
Display | 128 x 64LCD dot matrix display |
Alarm Print Interface | Alarm printer |
Indicator Light | Normal indicator light |
The main power supply is faulty or normal | |
Mute button | |
Communication failures | |
Fault indicator light | |
The backup power supply is faulty or normal | |
Fire alarm | |
The Keys | Up, down, left, right, Confirm, cancel/mute, self-check, reset |
Buzzer | The key sound |
Working Temperature | -10℃~55℃ |
Working Humidity | ≤93%RH |
Tel
